2010-2011 Rush Upper Steering Assembly - Polaris 600 RUSH 2010 Manual

Steering and Suspensions

2010-2011 Rush Upper Steering Assembly

INSTALL CLAMP BUSHINGS
HERE
APPLY GREASE TO BUSHINGS PRIOR TO ASSEMBLY
CAUTION
Never re-use lock nuts. Always re-assemble using new
lock nuts.
A: 14.7 ft-lbs (20 Nm)
B: 12 ft-lbs (16 Nm)
C: (2010) = 15 ft-lbs (20 Nm)
C: (2011) 20 ft-lbs (27 Nm)
Throttle Lever Block Screw: 35 in-lbs (4 Nm)
Master Cylinder Screws: 24 in-lbs (2.7 Nm)
Torque hand guard screws to prevent components
from moving/rotating during operation. DO NOT
CRUSH HANDLEBAR WHEN TORQUING SCREWS.
8.20
B
HANDLEBAR HOOK
POST CLAMPS
C
CLAMP BUSHINGS
C
= T
HANDLEBAR COVER
A
HANDLEBAR CLAMPS
RISER
HANDLEBAR CLAMPS
A
A
STEERING POST
HAND GUARDS/MOUNTS
NOTE: Assembly Notes
• Install handlebar riser with "FWD" facing front of
vehicle.
B
HANDLEBAR HOOK