Espressif ESP32-S2 Programming Manual page 43

Chapter 1. Get Started
Software Setup Please proceed to
the development environment.
The programming guide and application examples for your ESP32-S2-Kaluga-1 kit can be found in
repository on GitHub.
Contents and Packaging
Retail orders If you order one or several samples of the kit, each ESP32-S2-Kaluga-1 development kit comes in
an individual package containing:
• Main Board
– ESP32-S2-Kaluga-1
• Extension Boards:
– ESP-LyraT-8311A
– ESP-LyraP-CAM
– ESP-LyraP-TouchA
– ESP-LyraP-LCD32
• Connectors
– 20-pin FPC cable (to connect ESP32-S2-Kaluga-1 to ESP-LyraP-TouchA)
• Fasteners
– Mounting bolts (x8)
– Screws (x4)
– Nuts (x4)
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
Wholesale Orders If you order in bulk, the boards come in large cardboard boxes.
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
Hardware Reference
Block Diagram A block diagram below shows the components of the ESP32-S2-Kaluga-1 and their interconnec-
tions.
Power Supply Options
• Micro USB port, default power supply
• External battery via the 2-pin battery connector
• 5V and GND header pins
• 3V3 and GND header pins
Compatibility of Extension Boards
check the table given below.
Espressif Systems
Get Started, where Section
There are four ways to provide power to the board:
If you want to use more than one extension board at the same time, please
Submit Document Feedback
Installation Step by Step
32
will quickly help you set up
esp-dev-kits
Release v4.4