Espressif ESP32-S2 Programming Manual page 192

Chapter 2. API Reference
• [in] phy_reg: PHY register index code
• [in] reg_value: PHY register value
esp_err_t (*stack_input)(esp_eth_mediator_t
Deliver packet to upper stack.
Return
• ESP_OK: deliver packet to upper stack successfully
• ESP_FAIL: deliver packet failed because some error occurred
Parameters
• [in] eth: mediator of Ethernet driver
• [in] buffer: packet buffer
• [in] length: length of the packet
esp_err_t (*on_state_changed)(esp_eth_mediator_t
Callback on Ethernet state changed.
Return
• ESP_OK: process the new state successfully
• ESP_FAIL: process the new state failed because some error occurred
Parameters
• [in] eth: mediator of Ethernet driver
• [in] state: new state
• [in] args: optional argument for the new state
Macros
ETH_MAX_PAYLOAD_LEN
Maximum Ethernet payload size.
ETH_MIN_PAYLOAD_LEN
Minimum Ethernet payload size.
ETH_HEADER_LEN
Ethernet frame header size: Dest addr(6 Bytes) + Src addr(6 Bytes) + length/type(2 Bytes)
ETH_VLAN_TAG_LEN
Optional 802.1q VLAN Tag length.
ETH_JUMBO_FRAME_PAYLOAD_LEN
Jumbo frame payload size.
ETH_MAX_PACKET_SIZE
Maximum frame size (1522 Bytes)
ETH_MIN_PACKET_SIZE
Minimum frame size (64 Bytes)
Type Definitions
typedef struct esp_eth_mediator_s
Ethernet mediator.
Enumerations
enum esp_eth_state_t
Ethernet driver state.
Values:
ETH_STATE_LLINIT
Lowlevel init done
ETH_STATE_DEINIT
Deinit done
Espressif Systems
*eth, uint8_t *buffer, uint32_t length)
*eth,
esp_eth_mediator_t
181
Submit Document Feedback
esp_eth_state_t state, void *args)
Release v4.4