Espressif ESP32-S2 Programming Manual page 324

Chapter 2. API Reference
Return
• ESP_OK on success
Parameters
• [in]
esp_lcd_new_panel_st7789()
esp_err_t esp_lcd_panel_init(esp_lcd_panel_handle_t
Initialize LCD panel.
Note Before calling this function, make sure the LCD panel has finished the reset stage by
esp_lcd_panel_reset().
Return
• ESP_OK on success
Parameters
• [in]
esp_lcd_new_panel_st7789()
esp_err_t esp_lcd_panel_del(esp_lcd_panel_handle_t
Deinitialize the LCD panel.
Return
• ESP_OK on success
Parameters
• [in]
esp_lcd_new_panel_st7789()
esp_err_t esp_lcd_panel_draw_bitmap(esp_lcd_panel_handle_t
Draw bitmap on LCD panel.
Return
• ESP_OK on success
Parameters
• [in]
esp_lcd_new_panel_st7789()
• [in] x_start: Start index on x-axis (x_start included)
• [in] y_start: Start index on y-axis (y_start included)
• [in] x_end: End index on x-axis (x_end not included)
• [in] y_end: End index on y-axis (y_end not included)
• [in] color_data: RGB color data that will be dumped to the specific window range
esp_err_t esp_lcd_panel_mirror(esp_lcd_panel_handle_t
Mirror the LCD panel on specific axis.
Note Combined with esp_lcd_panel_swap_xy(), one can realize screen rotation
Return
• ESP_OK on success
• ESP_ERR_NOT_SUPPORTED if this function is not supported by the panel
Parameters
• [in]
esp_lcd_new_panel_st7789()
• [in] mirror_x: Whether the panel will be mirrored about the x axis
• [in] mirror_y: Whether the panel will be mirrored about the y axis
esp_err_t esp_lcd_panel_swap_xy(esp_lcd_panel_handle_t
Swap/Exchange x and y axis.
Note Combined with esp_lcd_panel_mirror(), one can realize screen rotation
Return
• ESP_OK on success
• ESP_ERR_NOT_SUPPORTED if this function is not supported by the panel
Parameters
• [in]
esp_lcd_new_panel_st7789()
Espressif Systems
panel: LCD panel handle, which is created by other factory API like
panel: LCD panel handle, which is created by other factory API like
panel: LCD panel handle, which is created by other factory API like
x_end, int y_end, const void *color_data)
panel: LCD panel handle, which is created by other factory API like
panel: LCD panel handle, which is created by other factory API like
panel: LCD panel handle, which is created by other factory API like
Submit Document Feedback
panel)
panel)
panel, int x_start, int y_start, int
panel, bool mirror_x, bool mirror_y)
panel, bool swap_axes)
313 Release v4.4