Espressif ESP32-S2 Programming Manual page 36

Chapter 1. Get Started
1. Connect the extension board(s) of your choice (go to their respective user guides if necessary)
2. Plug in both USB cables
3. Turn the Power Switch to ON - the Power On LED will light up
Software Setup Please proceed to
the development environment.
The programming guide and application examples for your ESP32-S2-Kaluga-1 kit can be found in
repository on GitHub.
Contents and Packaging
Retail orders If you order one or several samples of the kit, each ESP32-S2-Kaluga-1 development kit comes in
an individual package.
The contents are as follows:
• Main Board
– ESP32-S2-Kaluga-1
• Extension Boards:
– ESP-LyraT-8311A
– ESP-LyraP-CAM
– ESP-LyraP-TouchA
Espressif Systems
Get Started, where Section
Fig. 18: ESP32-S2-Kaluga-1 - package
25
Submit Document Feedback
Installation Step by Step will quickly help you set up
esp-dev-kits
Release v4.4