Zynq Chip Introduction - Alinx Z19 User Manual

⚫ MIPI interface
Two LANE MIPI camera input interfaces for connecting to the MIPI camera module
(AN5641).
⚫ JTAG Debugging interface
One 10-pin 2.54mm standard JTAG interface for FPGA program download and
debugging. Users can debug and download ZU9EG system through XILINX downloader.
⚫ Temperature and humidity sensor
An on-board temperature and humidity sensor chip (LM75) is used to detect the
ambient temperature and humidity of the board.
⚫ EEPROM
One piece of EEPROM 24LC04 with IIC interface.
⚫ RTC Real-Time Clock
One built-in RTC real-time clock.
⚫ LED light
Two dual side-mounted LEDs, including 1 power indicator, 1 DONE configuration
indicator, and 2 user indicators.
⚫ Keys
3 buttons, 1 side-mounted reset button, 2 user buttons.
2． ZYNQ Chip Introduction
The development board uses chips (model: XCZU19EG-2FFVC1760I) from Xilinx's Zynq
UltraScale+ MPSoCs EG series. The ZU19EG chip's PS system integrates four ARM
Cortex™-A53 processors with a speed of up to 1.3Ghz with Level 2 Cache support; in
addition, the ZU9EG also contains two Cortex-R5 processors with a speed of up to
533Mhz.
www.alinx.com
Z19 User Manual
9 /
74