Alinx Z19 User Manual page 8

Z19 User Manual
Four USB3.0 HOST interfaces of TYPE A are used to connect external USB peripherals,
such as mouse, keyboard, U disk and others.
⚫ Gigabit Ethernet interface
Two 10/100M/1000M Ethernet RJ45 interfaces, one each for PS and PL, for Ethernet
data exchange with computers or other network devices.
⚫ Uart interface
Two Uart to USB interfaces, one each for PS and PL, for communication with PC for
user-friendly debugging. The serial chip adopts the USB-UART chip of Silicon Labs
CP2102GM, and the USB interface adopts the MINI USB interface.
One ps uart is routed through a 1mm spaced 10pin FPC interface for connecting
peripherals such as the serial screen.
⚫ 4 QSFP28 fiber interface
Four independent transmission and reception channels, each capable of 25Gbps
operation at 100 meters of the OM4 MMF, with an overall data rate of 100Gbps.
⚫ MicroSD card holder
One MicroSD card used to store operating system images and file systems.
⚫ FMC expansion port
Two standard FMC HPC expansion ports that comply with standard dual-width FMC
standards. You can externally connect XILINX or our various FMC modules (HDMI
input/output module, binocular camera module, high-speed AD module, etc.).
⚫ CAN communication interface
Two CAN bus interfaces adopt SN65HVD232 chip of TI company and use 4-pin green
terminals.
⚫ 485 communication interface
Two 485 communication interfaces adopt MAX3485 chip of MAXIM company and
use 6-pin green terminals.
www.alinx.com
8/74