Table of Contents
Advertisement
Q90R R-GAGE® Radar Sensor Instruction Manual
Chapter Contents
4.1 Navigation Toolbar.......................................................................................................................................................................................... 9
4.2 Live Sensor Data and Legend........................................................................................................................................................................ 9
4.3 Summary Pane............................................................................................................................................................................................. 10
4.4 Sensor Settings Pane................................................................................................................................................................................... 10
4.5 Live Sensor Data Controls ........................................................................................................................................................................... 13
4.6 Using Measurement Hold Example.............................................................................................................................................................. 14
Chapter 4
4.1
Navigation Toolbar
Use this toolbar to connect to the sensor, to save or load a configuration, or to reset to factory defaults.
From the File menu, the following options are available:
Load Config
Load a configuration to the connected sensor. Use this option to set up multiple sensors with the same parameters.
Save Config
Save a configuration to a desired location for future use.
Reset Frequently Used Settings
Resets the software settings without changing the configuration of the attached sensor.
Exit
Exit the Banner Radar Configuration Software.
From the Sensor menu, the following options are available:
Connect
Connect to the sensor.
Disconnect
Disconnect from the sensor.
Factory Reset
Select to perform a factor reset on the sensor. All custom parameters will be lost.
From the Help menu, the following option is available:
About
Select to view the software version number, the copyright notice, and the warranty.
4.2
Live Sensor Data and Legend
The Live Sensor Data area displays the live distance and amplitude signal from the connected radar sensor. The signal
strength threshold, switch point, and hysteresis are also plotted. Use these signals to evaluate targets to determine where the
signal strength threshold and switch point should be configured for reliable detection.
Use the Y-Axis Max and the X-Axis Max to adjust the range displayed on the plot.
Legend -- Use the legend to select which data appears on the graph.
Signal
Displays the strength of the signal over distance.
Signal Threshold
Displays the signal strength threshold.
February 12, 2024
Banner Radar Configuration Workspace
© Banner Engineering Corp. All rights reserved.
9
Advertisement
Table of Contents
