Dual Mode Reference Surface Considerations; Banner Engineering Corp Limited Warranty; Fcc Part 15 Class A - Banner Q5X Quick Start Manual

B E C
ANNER NGINEERING ORP
5
4
3
2
1
0.5
0
0 500 1000
Figure 19: Temperature Effects (90% to 6% Reflectance)

Dual Mode Reference Surface Considerations

Optimize reliable detection by applying these principles when selecting your reference surface, positioning your sensor relative to the reference surface, and
presenting your target.
The robust detection capabilities of the Q5X allows successful detection even under non-ideal conditions in many cases. Typical reference surfaces are metal machine
frames, conveyor side rails, or mounted plastic targets. Contact Banner Engineering if you require assistance setting up a stable reference surface in your application.
For detailed instructions for detecting clear or transparent objects, refer to the Instruction Manual, p/n 219602.
1) Select a reference surface with these characteristics where possible:
◦ Matte or diffuse surface finish
◦ Fixed surface with no vibration
◦ Dry surface with no build-up of oil, water, or dust
2) Position the reference surface between 200 mm (20 cm) and the maximum sensing range.
3) Position the target to be detected as close to the sensor as possible, and as far away from the reference surface as possible.
4) Angle the sensing beam relative to the target and relative to the reference surface 10 degrees or more.

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering
Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the
warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITA-
TION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFOR-
MANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING
CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCI-
DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any
product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for
personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product
without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change;
Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that
which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.

FCC Part 15 Class A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Q5X L
ASER
1500 2000 2500 3000 3500
DISTANCE (mm)
© Banner Engineering Corp. www.bannerengineering.com
T S
RIANGULATION ENSOR WITH
A O IO-L
NALOG UTPUTS AND INK
Q S G
UICK TART UIDE
11