Banner R-GAGE Q90R Instruction Manual page 16

Q90R R-GAGE® Radar Sensor Instruction Manual
The remote input wire is disabled by default. Pulse the remote input wire 10 times or use the Banner Radar Configuration
software to enable the feature. After enabling the remote input feature, pulse the remote input according to the diagram and
the instructions provided in this manual. Remote teach can also be performed using the button on the Pro Converter Cable.
The length of the individual programming pulses is equal to the value T: 0.04 seconds ≤ T ≤ 0.8 seconds.
Exit remote programming modes by setting the remote input Low for longer than 2 seconds or by waiting for 60 seconds.
February 12, 2024
© Banner Engineering Corp. All rights reserved.
16