Table of Contents
Advertisement
®
EZ-SCREEN
Type 2 Light Screen
1 About This Document
1.1 Important . . . Read This Before Proceeding!
It is the responsibility of the machine designer, controls engineer, machine builder, machine operator, and/or maintenance personnel or
electrician to apply and maintain this device in full compliance with all applicable regulations and standards. The device can provide the
required safeguarding function only if it is properly installed, properly operated, and properly maintained. This manual attempts to
provide complete installation, operation, and maintenance instruction. Reading the manual in its entirety is highly recommended. Please
direct any questions regarding the application or use of the device to Banner Engineering.
For more information regarding U.S. and international institutions that provide safeguarding application and safeguarding device
performance standards, see
Standards and Regulations
WARNING: User Responsibility
The user is responsible to:
•
Carefully read, understand, and comply with all instructions for this device.
•
Perform a risk assessment that includes the specific machine guarding application. Guidance on a compliant
methodology can be found in ISO 12100 or ANSI B11.0.
•
Determine what safeguarding devices and methods are appropriate per the results of the risk assessment and
implement per all applicable local, state, and national codes and regulations. See ISO 13849-1, ANSI B11.19, and/or
other appropriate standards.
•
Verify that the entire safeguarding system (including input devices, control systems, and output devices) is properly
configured and installed, operational, and working as intended for the application.
•
Periodically re-verify, as needed, that the entire safeguarding system is working as intended for the application.
Failure to follow any of these responsibilities may potentially create a dangerous condition that may lead to
serious injury or death.
1.1.1 Use of Warnings and Cautions
This manual contains numerous WARNING and CAUTION statements:
•
Warnings refer to potentially hazardous situations which, if not avoided, may lead to serious injury or death.
•
Cautions refer to potentially hazardous situations which, if not avoided, which may lead to minor or moderate injury or
potential damage to equipment. Cautions are also used to alert against unsafe practices.
These statements are intended to inform the machine designer and manufacturer, the end user, and maintenance personnel, how to
avoid misapplication and effectively apply the EZ-SCREEN Type 2 Light Screen to meet the various safeguarding application
requirements. These individuals are responsible to read and abide by these statements.
1.2 EU Declaration of Conformity (DoC)
Banner Engineering Corp. herewith declares that the EZ-SCREEN Type 2 Light Screen is in conformity with the provisions of the
Machinery Directive 2006/42/EC and all essential health and safety requirements have been met.
Representative in EU: Peter Mertens, Managing Director Banner Engineering Europe. Address: Park Lane, Culliganlaan 2F, 1831 Diegem,
Belgium.
1.3 Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of
shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is
returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for
misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING,
WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING
UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL
BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES,
LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM
THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations
or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or
installation of this product or use of the product for personal protection applications when the product is identified as not intended for
such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering
Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to
4
on page 53.
www.bannerengineering.com - Tel: 763.544.3164
Advertisement
Table of Contents
