Table of Contents
Advertisement
Q90R R-GAGE® Radar Sensor Instruction Manual
3.3
Software Overview
Easy setup and configuration of range, sensitivity, and output using the Banner Radar Configuration software and Pro
Converter Cable.
Figure 6.
Banner Radar Configuration Software
1.
Navigation toolbar—Use this toolbar to connect to the sensor, to save or load a configuration, or to reset to factory
defaults
2.
Live Sensor Data and Legend—Shows the signal strength versus distance for the connected sensor, as well as
options to select which data displays on the graph
3.
Summary pane—Displays the distance to the target, the signal strength, and the output status
4.
Sensor Settings pane—Set the sensor parameters in this pane
5.
Status bar—Shows whether the sensor is connected, if a software update is available, and if the sensor data is being
recorded to a file
6.
Live Sensor Data controls—Use these controls to record, freeze, and play real-time sensor data, and to refresh the
sensor connection
8
© Banner Engineering Corp. All rights reserved.
February 12, 2024
Advertisement
Table of Contents
