Table of Contents
Advertisement
Q90R R-GAGE® Radar Sensor Instruction Manual
Chapter Contents
2.1 Sensor Orientation ......................................................................................................................................................................................... 5
2.2 Wiring ............................................................................................................................................................................................................. 5
2.3 Mount the Device ........................................................................................................................................................................................... 6
Chapter 2
2.1
Sensor Orientation
Correct sensor-to-object orientation is important to ensure proper sensing.
Minimize the tilt angle of a target relative to the sensor. The target should be tilted less than half of the beam angle.
Figure 2.
Tilt angle of the target relative to the sensor
T= Target Angle, BA=Beam Angle
2.2
Wiring
Quick disconnect wiring diagrams are functionally identical.
Figure 3.
Push-pull Output and Analog Current Output
bn (1)
bu (3)
*
bk (4)
Load
wh (2)
gy (5)
* Push-Pull output. User-configurable PNP/NPN setting.
February 12, 2024
Installation Instructions
target
θ
BA
θ
T
Q90R
Recommended
+
10–30 V DC
–
*
D_Out/IO-Link
4-20 mA
A_Out
Input
Continued on page 6
© Banner Engineering Corp. All rights reserved.
θ
T
θ
BA
< 1/2 x
θ
BA
Q90R
Not Recommended
Figure 4.
Push-pull Output and Analog Voltage Output
bn (1)
bu (3)
bk (4)
wh (2)
gy (5)
* Push-Pull output. User-configurable PNP/NPN setting.
+
12–30 V DC
–
*
*
Load
D_Out/IO-Link
0-10 V
A_Out
Input
5
Advertisement
Table of Contents
