Table of Contents
Advertisement
Installation Guide Linear Rotary Motors
4.2.2 Horizontal installation
The motor can be screwed to the 4 threaded holes provided at the front.
There are 2 options for the rear mounting:
a) Fastening via threaded holes on the side at the end of the motor
b) Slight clamping via clamping ring on the cylindrical body
All technical details are shown in the "Dimensions" chapter.
Option a)
Option b)
NTI AG / LinMot
PR01-52-SSCH
ENG
Page 11 / 30
Advertisement
Table of Contents
