Table of Contents
Advertisement
Installation Guide Linear Rotary Motors
3 Intended Use
3.1 Designation Code PR01-52-SSCH Linear Rotary Motors
PR01-52x60-R_37x120F-HP-R-110-L_MSxx_SSCH
3.2 Linear Rotary Motor
Rotary motor
Linear rotary shaft
LinMot linear rotary motors are direct electric drives for use in industrial and commercial installations. For
correct handling, observe the warnings listed in chap. 2. The motors are characterized by a slim design in
which a linear and a rotary motor including the magnetic spring "MagSpring" are integrated in a common
housing. This features a high-precision and complex mechanical system. The optimization of the internal
moving load mass, as well as the moment of inertia, enables a dynamic movement of linear and rotating
motion.
The linear rotary motor is designed for the simultaneous execution of linear and rotating movements. This
means that the rotary and linear movements can be executed simultaneously and completely independently
of each other. However, if the application permits, it is recommended to execute the rotary movement with
the linear rotary shaft retracted, if possible. The rotary and linear movements should also be carried out one
after the other. This reduces the bearing loads and achieves a longer service life of the linear rotary shaft.
By combining linear and rotary motion, highly complex motion patterns, such as those required in sealing
and assembly applications, can be easily realized using LinMot linear rotary motors. In addition to the two
motors and the magnetic spring, an optional air feed-through (hollow shaft) is also available.
NTI AG / LinMot
Linear Motor
Stainless steel housing
PR01-52-SSCH
Stainless Steel Housing
Option Load Compensation / MagSpring®
Option Hollow Shaft
Stroke Range
Connector Type (Linear Motor)
Linear Motor Type
Connector Type (Rotary Motor)
Rotary Motor Type
Motor Family
MagSpring
ENG
Connections
(electrical / air)
Page 7 / 30
Advertisement
Table of Contents
