Stopping The Engine; Emergency Engine Stop; Normal Engine Stop (D1, D2 Types) - HONDA marine BF115J Owner's Manual

9. STOPPING THE ENGINE

• After stopping the engine, be
sure to turn OFF the ignition
switch or power switch before
turning OFF the battery switch.
If the battery switch is turned
OFF while the ignition switch or
power switch is ON, the buzzer
will sound three times briefly.

Emergency Engine Stop

(D1, D2 types)
EMERGENCY EMERGENCY STOP
STOP SWITCH SWITCH
CLIP LANYARD
112
(R1 type)
STOP
EMERGENCY
STOP SWITCH
CLIP
(R2, R3 types)
EMERGENCY STOP SWITCH
LANYARD
STOP
Pull the curl cord of the emergency
stop switch and remove the lock plate
from the switch; this will stop the
engine.
If the emergency stop switch is
activated while the engine is running,
the engine will shut down abruptly
and the boat will quickly decelerate,
potentially causing occupants and
objects to be thrown forward and/or
overboard.
If the emergency stop switch is
activated, the emergency stop switch
EMERGENCY STOP
SWITCH LANYARD clip must be reinserted before the
engine can be restarted.
It is a good idea to stop the engine
with the emergency stop switch
lanyard from time to time to be sure
that the emergency stop switch is
operating properly.
Normal Engine Stop
(D1, D2 types)
1. Move the shift lever to NEUTRAL
After sailing with the throttle fully
open, cool down the engine by
running it at the idle speed for a few
minutes.
position.