Remove The Battery Pack; Troubleshooting Guide; Technical Specification - Tesla HS300WX User Manual

Cordless vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

REMOVE THE BATTERY PACK

Press the battery pack releasing button and pull the battery out.

TROUBLESHOOTING GUIDE

PROBLEM
Machine doesn't work
The machine can't suck ash or
suction is very weak
Dust escaping from vacuum
Vacuum brushes will not pick-up

TECHNICAL SPECIFICATION

Power motor: 200W
Operating speeds : 2
Power supply: Battery 2200mAh
Battery format: Battery pack
Voltage 18,5V
Disposal
Do not Dispose of batteries with house-hold waste!
Batteries and packaging should be sorted for environmentally friendly recycling.
Only for EU countries:
according to the Directive 2006/66/EC, defective or used batteries,must be collectes separately and disposed of
in an environmentally correct manner.
8
POSSIBLE REASON
The battery may be no electricity
1. The DUST CUP may be full
2. Lack of battery power
1. Dust cup is full.
2. The dust filter dust cup or cup bottom
there may not be assembled
Dust cup is full.
POSSIBLE SOLUTION
Check the battery for electric or
change the battery.
1. Empty dust cup (pic 7).
2. Connect the charger.
1. Empty dust cup .
2. Check to see if the dust at the
bottom of the cup lock button
Empty and clean dust cup container.

Advertisement

Table of Contents
loading

Table of Contents