Your Responsibilities - Xerox DocuTech 6100 Install Manual

Installation

Your responsibilities

5-2
6. Xerox personnel schedule comprehensive customer training
(2 to 3 days).
7. Xerox personnel review preventive maintenance schedules
and service call procedures.
Xerox is responsible for the physical installation of the printer
and DocuSP controller hardware and software components. You
have the general site responsibility of ensuring that the right
personnel, supplies, and network information are available.
At the time of installation, you should do the following:
• Ensure that a System Administrator for your network is
available while software is loaded.
• Network addresses and host names are required during the
software installation. Be prepared to provide Xerox personnel
with the completed worksheets from the Getting Ready for
the DocuSP Installation guide. The installation can not be
completed without this information.
• Designate two client workstations for Xerox client software
installation: one for initial system validation and another for
use in operator training provided by your systems analyst.
• Check the documentation and software kits with their packing
lists for completeness.
• Load Xerox client software on any additional client
workstations.
Remember that you are responsible for supplying, installing,
and maintaining your client workstations and the Ethernet
local network (LAN) that connects them to the DocuSP
controller.
• Have test jobs ready to run.
• Have your operators available for training.
DocuTech 61xx Installation Planning Guide