DocuTech 61xx Installation Planning Guide
To avoid downtime, always have an adequate amount of the
necessary supplies. To do this, you need to establish a
procedure for checking and ordering supplies. A supplies
checklist is provided at the end of this chapter to help you with
this task. It lists the supplies needed for the printer and contains
a column for you to enter the date when you want to place the
order and a column to record the date of the actual order. The
consumable supplies table, also located at the end of this
chapter, contains a list of supplies available for the printer.
It is important that you check your supplies regularly and order
before you run out. Plan on approximately five working days for
the delivery after placing the order. You can make arrangements
to receive them sooner in emergency situations.
Your sales representative can help you submit the initial order of
supplies needed for installation. These items include paper, dry
ink, fuser agent, and developer.
Once your printer volume is established, planning ahead and
buying Xerox supplies in quantity can save you money. Your
supply specialists can help you.
NOTE: The supplies resources listed below are for the United
States only. Multinational customers should contact their local
representatives for supplies ordering information.
There are two centers available to assist you:
To order Xerox paper, transparencies, labels, dry ink,
developer, fuser agent, stitcher wire, and diskettes, call the
Xerox Supply Center weekdays between 7:30 a.m. and 6:00
p.m., Pacific Standard time.
If you prefer, you may mail orders to the following address:
P.O. Box 25075
Santa Ana, CA 92799-5075
To order cleaning supplies, call the Xerox Customer Parts
and Product Support Center weekdays between 5:30 a.m.
and 5:00 p.m., Eastern Standard time, at 1-800-828-5881
You may also mail cleaning supplies orders to the following
Maintenance and support services