Room Dimensions Required For Multiple Docutech Installation; Front To Front - Xerox DocuTech 6100 Install Manual

Select and prepare an installation site

Room dimensions required for multiple DocuTech installation

4-4
When multiple DocuTech systems are installed in one room, part
of the required clearance space can be shared between the
systems. When sharing space, the following restrictions apply:
• Instead of 50 inches (1270 mm) in front of each printer, a
shared space of 70 inches (1778 mm) is maintained for
operator/service space.
• The space can only be shared with another Xerox printer.
• There must be 78 inches (1980 mm) of vertical clearance
throughout the entire area.

Front to front

The following figure illustrates the minimum required clearance
space when two DocuTech systems are installed in a front-to-
front orientation.
DocuTech 61xx Installation Planning Guide