Table of Contents
Advertisement
5.1.4.7 Configuring Snapshot Settings
You can configure the basic snapshot settings such as quantity of snapshot each time, channel(s) to
take snapshot, and image size and quality of snapshot.
You can also configure general settings by selecting Main Menu > CAMERA > Encode > Snapshot.
For more information about snapshot settings, see "5.8 Configuring Snapshot Settings".
After you have configured the encode settings, on the Encode page, click Next.
Configure the settings for the snapshot parameters.
Parameter
Manual Snapshot
Channel
Type
Size
Quality
Interval
Snapshot
Table 5-6 Snapshot parameters
Description
In the Manual Snapshot list, select how many snapshots you want to take
each time.
In the Channel list, select the channel that you want to configure the settings
for.
In the Mode list, you can select Human Face, Event, or General as the event
type for which you want to take a snapshot.
Scheduled: The snapshot is taken during the scheduled period.
Event: The snapshot is taken when there is an alarm event occurs, such
as motion detection event, video loss, and local alarms.
Face Snapshot: The snapshot is taken when the face is detected. The
face detection function is support only with the Channel 1.
In the Size list, select a value for the image. The bigger the value is, the better
the image will become.
Configure the image quality by 6 levels. The higher the level is, the better the
image will become.
Configure or customize the snapshot frequency.
65
User's Manual
Advertisement
Table of Contents
