Table of Contents
Advertisement
Parameter
Show Message
Send Email
Buzzer
Log
Post Record
Alarm Tone
Click Apply to complete the settings.
5.10.6 Configuring Disarming
You can disarm all alarm linkage actions as needed.
Select Main Menu > ALARM > Disarming.
Click
(Optional) Select Off to disable event notifications.
Description
Select the Show Message checkbox to enable a pop-up message in your local
host PC.
Select the Send Email checkbox to enable the system to send an email
notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main Menu >
NETWORK > Email.
Select the checkbox to activate a buzzer noise at the Device.
Select the checkbox to enable the Device to record a local alarm log.
Continue to record for some time after the alarm is ended. The value ranges
from 10 seconds to 300 seconds.
Select to enable audio broadcast/alarm tones in response to a network alarm
event.
to enable disarming.
168
Disarming
User's Manual
Advertisement
Table of Contents
