Table of Contents
Advertisement
Configure the settings for date and time parameters.
Parameter
Description
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the system, and the
time in adjust automatically.
System Time
Do not change the system time randomly; otherwise the recorded video
cannot be searched. It is recommended to avoid the recoding period or stop
recording first before you change the system time.
In the Time Zone list, select a time zone for the system.
Time Zone
Date Format
In the Date Format list, select a date format for the system.
Date Separator
In the Date Separator list, select a separator style for the date.
In the Time Format list, select 12-HOUR or 24-HOUR for the time display
Time Format
style.
DST
Enable the Daylight Saving Time function. Click Week or click Date.
Start Time
Configure the start time and end time for the DST.
End Time
Enable the NTP function to sync the Device time with the NTP server.
NTP
If NTP is enabled, device time will be automatically synchronized with
server.
In the Server Address box, enter the IP address or domain name of the
corresponding NTP server.
Serve Address
Click Manual Update, the Device starts syncing with the server
immediately.
Port
The system supports TCP protocol only and the default setting is 123.
Date&Time
57
User's Manual
Advertisement
Table of Contents
