Table of Contents
Advertisement
Configure the settings for the SNMP parameters.
Parameter
Enable
Version
SNMP Port
Read Community
Write Community
Trap Address
Trap Port
Read-Only Username
Read/Write Username
Authentication Type
Authentication
Password
Encryption Password
SNMP
Table 5-52 SNMP parameters
Description
Enable the SNMP function.
Select the checkbox of SNMP version(s) that you are using.
The default version is V3. There is a risk of select V1 or V2.
Indicates the monitoring port on the agent program.
Indicates the read/write strings supported by the agent program.
Indicates the destination address for the agent program to send the Trap
information.
Indicates the destination port for the agent program to send the Trap
information.
Enter the username that is allowed to access the Device and has the
"Read Only" permission.
Enter the username that is allowed to access the Device and has the
"Read and Write" permission.
Includes MD5 and SHA. The system recognizes automatically.
Enter the password for authentication type and encryption type. The
password should be no less than eight characters.
280
User's Manual
Advertisement
Table of Contents
