Table of Contents
Advertisement
On the humidity information line, click
Configure the settings for the following parameters.
Parameter
Access Point
Type
Detect Position Name
Preview Channel
Event Type
Upper Limit
Enable
Schedule
Alarm-out Port
.
Setting
Table 5-41 Alarm settings
Description
Indicates the channel that the camera is connected to.
Humidity by default.
Set the detect position name.
Select the channel that you want to preview to help monitor the channel
of access point. This channel could be the channel of access point or any
other channels according to your actual situation.
Select event type as High Humidity or Low Humidity, and set the upper
and low humidity limit respectively. For example, select event type as
High Humidity and set upper limit as 60, the alarm occurs when the
humidity reaches 60%RH.
Enable the alarm function.
Define a period during which the alarm setting is active. For more
information about setting the period, see "5.10.4.1 Configuring Motion
Detection Settings".
Click Setting to configure the parameters.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Wireless Siren: Enable alarm activation through devices connected
by USB gateway or camera gateway.
259
User's Manual
Advertisement
Table of Contents
