Table of Contents
Advertisement
Parameter
Log
Alarm Tone
Click Apply to complete the settings.
5.10.5.2 Configuring Network Event Settings
Select Main Menu > ALARM > Exception > Network.
Configure the settings for the Network event.
Parameter
Event Type
Enable
Alarm-out Port
Post-Alarm
Description
Select the checkbox to enable the Device to record a local alarm log.
Select to enable audio broadcast/alarm tone in response to a HDD alarm
event.
Network
Table 5-34 Network event settings
Description
In the Event Type list, select Offlice, IP Conflict, or MAC Conflict as the event
type.
Enable or disable the Network event detection function.
Click Setting to configure the parameters.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected alarm
box.
Wireless Siren: Enable alarm activation through devices connected by
USB gateway or camera gateway.
Set a length of time for the Device to delay turning off alarm after the external
alarm is cancelled. The value ranges from 10 seconds to 300 seconds, and the
default value is 10 seconds.
167
User's Manual
Advertisement
Table of Contents
