Table of Contents
Advertisement
Parameter
Video Matrix
Buzzer
Log
Alarm Tone
Warning Light
Siren
Smart Illumination
Click Apply to complete the settings.
5.11.3.1.2 Searching for SMD Reports
You can search the detection history by channel, object type, and time.
Select Main Menu > AI > AI Search > SMD.
Select the channel, enter the start time and end time, and select the object type you need.
Click Search.
The results are displayed.
5.11.3.2 Configuring IVS Function
The IVS function processes and analyzes the images to extract the key information to match with the
preset rules. When the detected behaviors match with the rules, the system activates alarms.
5.11.3.2.1 Configuring IVS Parameters
The alarms are generated according to the configured parameters.
Select Main Menu > AI > Parameters > IVS.
Description
Select the checkbox to enable the function. When an alarm event occurs,
the video output port outputs the settings configured in Main Menu >
DISPLAY > Tour.
This function is available on select models.
Select the checkbox to activate a buzzer noise at the Device.
Select the checkbox to enable the Device to record a local alarm log.
Select to enable audio broadcast/alarm tones in response to a motion
detection event.
Select the checkbox to enable warning light alarm of the camera.
Select the checkbox to enable sound alarm of the camera.
Select the checkbox to enable the smart illumination of the camera.
SMD
210
User's Manual
Advertisement
Table of Contents
