Table of Contents
Advertisement
Parameter
Mode
Add
Type
IP Address
Start Port
End Port
Start Address/End Address
MAC Address
Step 4
Click Apply to complete the settings.
5.19.3.2 Account Lockout
Step 1
Select Main Menu > SECURITY > Attack Defense > Account Lockout.
Table 5-62 Firewall parameters
Description
Mode can be configured when Type is Network Access.
● If Allowlist is enabled, you can visit device port successfully with
IP/MAC hosts in the allowlist.
● If Blocklist is enabled, you cannot visit device port with IP/MAC
hosts in blocklist.
When Type is Network Access, you can configure IP Address, IP
Segment and MAC Address.
You can select IP address, IP segment and MAC address.
Enter IP Address, Start Port and End Port that is allowed or forbidden.
When Type is IP Address, they can be configured. Start Port and End
Port can be configured only in Network Access Type.
Enter Start Address and End Address of IP Segment.
When Type is IP Segment, they can be configured.
Enter MAC Address that is allowed or forbidden
When Type is MAC Address, it can be configured.
321
User's Manual
Advertisement
Table of Contents
