Table of Contents
Advertisement
Configure the settings for the siren parameters.
Parameter
Channel
Play
Delay
Audio Clip
Volume
Update Audio Clip
Click Apply to complete the settings.
Related Operations
You can update the audio files of the camera on the local interface.
1.
Prepare a USB device or other external storage device and plug it into the Device.
Click Browse.
2.
3.
Select the upgrade audio file (.bin or .wav).
Click OK to return to the Siren page.
4.
Click Upgrade to upgrade the alarm audio file of the camera.
5.
Table 5-30 Siren parameters
Description
In the Channel list, select a channel that is connected to a camera that
supports audio function.
Click Play to manually trigger the IP camera to play audio file.
Set a length of time for the Device to delay turning off alarm after the alarm is
cancelled. The value ranges from 5 seconds to 30 seconds, and the default
value is 5 seconds.
Select the audio clip for the siren sound. The default setting is Clip 1.
Select the volume for the audio clip. You can select the flash frequency from
Low, Middle, and High.
Import the upgrade audio file (.bin or .wav) to upgrade the alarm audio file of
the camera.
156
Siren
User's Manual
Advertisement
Table of Contents
