Dahua DH-XVR54 L-I2 Series User Manual page 220

Ai digital video recorder
Table of Contents

Advertisement

Parameter
Post-Alarm
Show Message
Report Alarm
Send Email
Record Channel
PTZ Linkage
Post Record
Tour
Picture Storage
Sub Screen
Description
Set a length of time for the Device to delay turning off alarm after the
external alarm is cancelled. The value ranges from 0 seconds to 300
seconds, and the default value is 10 seconds. If you enter 0, there will be
no delay.
Select the Show Message checkbox to enable a pop-up message in your
local host PC.
Select the Report Alarm checkbox to enable the system to upload the
alarm signal to the network (including alarm center) when an alarm event
occurs.
Select the Send Email checkbox to enable the system to send an email
notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > Email.
Select the channel(s) that you want to record. The selected channel(s)
starts recording after an alarm event occurs.
The recording for motion detection and auto recording function must be
enabled. For details, see "5.1.4.9 Configuring Recorded Video Storage
Schedule" and "5.9.1 Enabling Record Control".
Click Setting to display the PTZ page.
Enable PTZ linkage actions, such as selecting the preset that you want to
be called when an alarm event occurs.
Motion Detect can only activate PTZ preset.
Set a length of time for the Device to delay turning off recording after the
alarm is cancelled. The value ranges from 10 seconds to 300 seconds, and
the default value is 10 seconds.
Select the Tour checkbox to enable a tour of the selected channels.
Select the Snapshot checkbox to take a snapshot of the selected channel.
To use this function, select Main Menu > CAMERA > Encode > Snapshot,
in the Type list, select Event.
Select the checkbox to enable the function. When an alarm event occurs,
the extra screen outputs the settings configured in Main Menu >
DISPLAY > Tour > Sub Screen.
This function is available on select models.
To use this function, extra screen shall be enabled.
209
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dh-xvr54 l-4kl-i2 seriesDh-xvr54 l-i3 seriesDh-xvr54 l-4kl-i3 seriesDh-xvr74 l-4k-i2 seriesDh-xvr74 l-4k-i3 seriesDh-xvr1b-i series ... Show all

Table of Contents