Procedure
Select Main Menu > NETWORK > UPnP.
Configure the settings for the UPnP parameters.
Parameter
Port Mapping
Status
LAN IP
WAN IP
UPnP
Table 5-51 UPnP parameters
Description
Enable the UPnP function.
After it is enabled, the intranet services and ports shall be mapped to
extranet, proceed with caution.
Indicates the status of UPnP function.
Offline: Failed.
Online: Succeeded.
Enter IP address of router on the LAN.
After mapping succeeded, the system obtains IP address automatically
without performing any configurations.
Enter IP address of router on the WAN.
After mapping succeeded, the system obtains IP address automatically
without performing any configurations.
278
User's Manual