Dahua DH-XVR54 L-I2 Series User Manual page 227

Parameter
Buzzer
Log
Alarm Tone
Warning Light
Siren
Smart Illumination
Click OK to save the settings.
Select the Enable checkbox, and then click Apply.
The tripwire detecting function is active. When the target object crosses the tripwire in the
defined direction, the system activates alarms.
Configuring Intrusion Rules
When the target enters and leaves the defined detection area, or the target appears in the defined
area, the system activates alarms.
You can define the shape and quantity of intrusion areas.

Supports detecting the behaviors that enter and leave the intrusion areas.

Supports detecting the behaviors that are moving in the intrusion areas. The quantity of areas

and lasting time can be configured.
Supports size filtering for target.

On the rule line that you added, in the Type list, select Intrusion.
Draw an area.
In the Channel list, select the channel that you want to configure the rules for.
1)
2) Click
Description
Select the checkbox to activate a buzzer noise at the Device.
Select the checkbox to enable the Device to record a local alarm log.
Select to enable audio broadcast in response to a face detection event.
Select the checkbox to enable the warning light alarm of the camera.
Select the checkbox to enable the sound alarm of the camera.
Select the checkbox to enable the smart illumination of the camera.
Intrusion
.
216
User's Manual