Table of Contents
Advertisement
Configure the settings for the warning light parameters.
Parameter
Channel
Delay
Mode
Flicker Frequency
Click Apply to complete the settings.
5.10.3.3 Configuring Siren
When the motion detection alarm is activated, the system links the camera to generate sound alarm.
To use this function, connect at least one camera that supports audio function.
Select Main Menu > ALARM > Alarm-out Port > Siren.
Warning light
Table 5-29 Warning light parameters
Description
In the Channel list, select a channel that is connected to a warning light
camera.
Set a length of time for the Device to delay turning off alarm after the
alarm is cancelled. The value ranges from 5 seconds to 30 seconds, and
the default value is 5 seconds.
Set the alarm mode of warning light to be Always on or Flicker.
When setting the alarm mode of warning light to be Flash, you can select
the flash frequency from Low, Middle, and High.
155
User's Manual
Advertisement
Table of Contents
