5.12.2.5 Searching IoT Information
You can search and backup all your IoT data.
To back up the data, you should prepare a USB device and plug it into the Device.
On the home page, select IoT > IOT Search.
Configure the parameters settings.
Parameter
Access Point
Display Type
Type
Status
Start Time
End Time
Click Search.
The system starts search according to your parameters settings. After searching is finished,
the result displays.
Click Goto to switch result pages.
IOT search
Table 5-42 IOT search parameters
Description
Indicates the channel that the camera is connected to.
In the Display Type list, select List or Diagram.
Select the information type that you want to search. You can select
Humidity or Temperature.
Select the information state that you want to search.
This option is available when you select List in the Display Type list.
Enter the start time and end time for the information that you want to
search.
261
User's Manual