Table of Contents
Advertisement
Configure the settings for the alarm output.
Parameter
Local
Alarm
Extension
Alarm
Alarm Reset
Click Apply to save the settings.
5.10.3.2 Configuring Warning Light
When the motion detection alarm is activated, the system links the camera to generate warning light
alarm.
To use this function, connect at least one warning light camera to your Device.
Select Main Menu > ALARM > Alarm-out Port > Warning Light.
Table 5-28 Alarm output settings
Description
Alarm Type
Select alarm type for each alarm output port.
Status
Indicates the status of each alarm output port.
Select the alarm box number corresponding to the address number
Alarm Box
configured by the DIP switch on the Alarm Box.
Alarm Type
Select the alarm type for each alarm output ports.
Status
Indicates the status of each alarm output port.
Click OK to clear all alarm output status.
Alarm mode
154
User's Manual
Advertisement
Table of Contents
