Table of Contents
Advertisement
Configure the settings for the register parameters.
Parameter
Enable
No.
Server IP Address
Port
Sub Service ID
Click Apply to complete the settings.
5.15.1.12 Configuring Alarm Center Settings
You can configure the alarm center server to receive the uploaded alarm information. To use this
function, the Report Alarm checkbox must be selected. For details about alarm event settings, see
"5.10 Alarm Events Settings".
Select Main Menu > NETWORK > Alarm Center.
Register
Table 5-54 Register parameters
Description
Enable the register function.
The default value is 1.
Enter the server IP address or the server domain that you want to register
to.
Enter the port of the server.
This ID is allocated by the server and used for the Device.
283
User's Manual
Advertisement
Table of Contents
