Configure the settings for the local alarms.
Parameter
Alarm-in Port
Alarm Name
Enable
Device Type
Schedule
Anti-Dither
Local page
Table 5-27 Local alarm settings
Description
Select the channel number.
Enter the customized alarm name.
Enable or disable the local alarm function.
In the Device Type list, select NO or select NC as the voltage output
type.
Click Setting to display setting interface.
Define a period during which the motion detection is active. For details,
see "Setting Motion Detection Period" section in "5.10.4.1 Configuring
Motion Detection Settings".
Configure the time period from end of event detection to the stop of
alarm.
148
User's Manual