Ethernet - Xerox FaxCentre 2218 System Administration Manual

Ethernet

Use these instructions to set the rated speed for Ethernet using CentreWare Internet Services:
To complete the installation of the WorkCentre 4118 / FaxCentre 2218, perform these steps:
Open CentreWare Internet Services (see Accessing CentreWare Internet Services on
1
page 7-4).
At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre
2
2218, select the [Properties] tab.
Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and
3
then select the [+] symbol to the left of the Physical Connections folder.
In the Properties frame, within the Physical Connections folder, select [Ethernet].
4
Choose the appropriate [Rated Speed].
5
Click the [Apply] button to implement any changes.
6
NOTE: Click the [Undo] button to cancel any changes made and return to the previous
values.
Select the [Status] tab and then select [Reboot Machine] to enable the selection to take
7
effect.
Page 7-6 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide