9
To enable or disable LPR/LPD,
press
required setting, [Enable] or
[Disable] displays and press
[Enter].
10
If the protocol is enabled, enter
the port number using the keypad
and press [Enter].
NOTE:
2218 will accept LPR print jobs, it is recommended that you do this ONLY with extreme
caution as most LPR spoolers are set to send print jobs to the default port number, 515. To
change Port number see "Using CentreWare Internet Services" on page 7-3.
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
or
until the
While you can change the port number at which the WorkCentre 4118 / FaxCentre
LPR/LPD
[Enable]
Enter Port No.
[0-65535]>515
Page 6-5