Xerox FaxCentre 2218 System Administration Manual page 70

NOTE: DHCP automatically assigns IP addresses and is the default setting. If the IP Address
needs to be edited but is unavailable, select IP Address Resolution and then Static to
continue.
Check the DNS Settings details and if necessary enter the correct information required.
6
Scroll down the screen and check the SLP Configuration details and if necessary enter the
7
correct information required.
Click the [Apply] button to implement any changes.
8
NOTE: Click the [Undo] button to cancel any changes made and return to the previous
values.
Select the [Status] tab and then select [Reboot Machine] to enable the selections to take
9
effect.
Continue with Test Print, see Test Print 8-16.
10
Page 7-10
Enter the [Subnet Mask].
Enter the [Gateway Address].
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide