Appletalk Installation; Installation Procedure; Network Communication Setup - Xerox FaxCentre 2218 System Administration Manual

AppleTalk Installation

Installation Procedure

There are three stages required to install the WorkCentre 4118 / FaxCentre 2218 on an
Appletalk network:

Network Communication Setup

Print Driver Installation
Test Print
Network Communication Setup
This procedure is used to setup the network communication parameters of the WorkCentre
4118 / FaxCentre 2218.
At the WorkCentre 4118 / FaxCentre 2218, perform these steps:
HINT:
4118 / FaxCentre 2218, refer to the CentreWare Internet Services chapter for instructions.
Connect the device to the network outlet or cable.
1
2
Press the [Machine Status]
button.
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
This requires the WorkCentre 4118 / FaxCentre 2218 to be setup for
Appletalk.
A test print should be submitted to ensure the WorkCentre 4118 / FaxCentre
2218 has been installed and configured correctly.
Xerox CentreWare Internet Services can also be used to configure the WorkCentre
Machine Setup
Fax Setup
Page 5-3