Network Communication Setup; Automatically Setting Tcp/Ip Addresses - Xerox FaxCentre 2218 System Administration Manual
Xerox faxcentre 2218: user guide
Hide thumbs
Also See for FaxCentre 2218:
- User manual (212 pages) ,
- Voluntary product accessibility template (11 pages) ,
- Service manual (10 pages)
Table of Contents
Advertisement
5
Press
displays and press [Enter].
6
Press
displays and press [Enter].
To enable TCP/IP, press
press [Enter]. Otherwise select
Disable and press [Enter].
Network Communication Setup
Automatically setting TCP/IP Addresses
At the WorkCentre 4118 / FaxCentre 2218, perform these steps:
Ensure the Ethernet Port has been configured (see "Ethernet Port" on page 2-3).
1
2
Press the [Machine Status]
button.
3
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
or
until TCP/IP
or
until Setup
until Enable displays and
or
until System
or
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
Config Network
[TCP/IP]
TCP/IP
[Setup]
Page 2-7
Advertisement
Table of Contents
