Manual Call Pick-Up Without Off-Hooking; Call Monitoring; Stopping A Call In Progress - Xerox FaxCentre F116 User Manual

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 47 Mercredi, 11. août 2004 4:48 16
Setting Up Your Machine

Manual call pick-up without off-hooking

When a line is idle, you can pick up a line on it manually (L1 or L2) by pressing the
(loudspeaker) key:
Press the
Select the line in question (L1 or L2) using the
Press the
NOTE : If a call is in progress on line L2
case, the operation requested is performed without using the menu described above.
If only one call is in progress on line 1 (L1) (model F116) or line 2 (L2) (model F116L), the
following is displayed:
called number
L1:
TRANS. P1
If 2 calls are in progress, the on-screen display switches back and forward between the following
on the display's 2 lines:
called number
L1:
TRANS. P1
and
called number
L2:
TRANS. P1
S
TOPPING A CALL IN PROGRESS
If only one call is in progress on line L1 or line L2 (model F116L):
Press the
Confirm the stopping of the call in progress by pressing the
This screen remains displayed for a maximum of 5 seconds.
If 2 calls are in progress on line L1 and line L2:
Press the
Select the line in question (L1 or L2) using the
Press the
This screen remains displayed for a maximum of 5 seconds.
Date en cours : 11 août 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX
FR_GB_ESP\Anglais\Configuration.fm
key.
again to confirm your selection.
(model F116L)
, only line L1 may be picked up manually. In this
C
ALL MONITORING
key.
key.
key again to confirm.
- 47 -
and keys.
key again.
and keys.