Table of Contents
Advertisement
Chapter 35 Link Layer Discovery Protocol (LLDP)
Figure 271 Advanced Application > LLDP > LLDP-MED Location (Stacking mode)
The following table describes the labels in this screen.
Table 179 Advanced Application > LLDP > LLDP-MED Location
LABEL
DESCRIPTION
Port
Enter the port number you want to set up the location within the LLDP-MED network.For
Stacking mode the first field box is the Slot ID, the second field box is the port.
Location
The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates
information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude
Enter the latitude information. The value should be from 0º to 90º.
•
north
•
south
Longitude
Enter the longitude information. The value should be from 0º to 180º.
•
west
•
east
Altitude
Enter the altitude information. The value should be from -2097151 to 2097151 in meters
or in floors.
•
meters
•
floor
GS3700/XGS3700 Series User's Guide
369
Advertisement
Table of Contents
