Table of Contents
Advertisement
Table 61 Advanced Application > Spanning Tree Protocol > Status: MRSTP (continued)
LABEL
Designated Cost
Root Guard State
(Standalone
mode)
11.8 Configure Multiple Spanning Tree Protocol
To configure MSTP, click MSTP in the Advanced Application > Spanning Tree Protocol screen.
See
Section 11.1.5 on page 134
Chapter 11 Spanning Tree Protocol
DESCRIPTION
This field displays the path cost to the LAN segment to which the port is connected when
the port is a designated port. Otherwise, it displays the path cost to the root bridge from
the designated port for the LAN segament to which this port is connected.
This field displays the state of the port on which root guard is enabled.
•
Root - inconsistent - the Switch receives superior BPDUs on the port and blocks the
port.
•
Forwarding - the Switch unbolcks and allows the port to forward frames again.
for more information on MSTP.
GS3700/XGS3700 Series User's Guide
147
Advertisement
Table of Contents
