Table of Contents
Advertisement
Figure 170 Advanced Application > Multicast > MVR (Stacking mode)
The following table describes the related labels in this screen.
Table 110 Advanced Application > Multicast > MVR
LABEL
DESCRIPTION
Active
Select this check box to enable MVR to allow one single multicast VLAN to be shared
among different subscriber VLANs on the network.
Group Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Multicast VLAN
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
ID
802.1p Priority
Select a priority level (0-7) with which the Switch replaces the priority in outgoing IGMP or
MLD control packets (belonging to this multicast VLAN).
Mode
Specify the MVR mode on the Switch. Choices are Dynamic and Compatible.
Select Dynamic to send IGMP reports or MLD messages to all MVR source ports in the
multicast VLAN.
Select Compatible to set the Switch not to send IGMP reports or MLD messages.
Slot (Stacking
This field appears only in stacking mode. Click the drop-down list to choose the slot
mode)
number of the Switch in a stack.
Port (Standalone
This field displays the port number. In stacking mode, the first box field is the slot ID and
or stacking
the second field is the port number.
mode)
Chapter 23 Multicast
GS3700/XGS3700 Series User's Guide
247
Advertisement
Table of Contents
