Table of Contents
Advertisement
Slide the rear bracket along the rail and set the bracket in place depending on the depth of the rack.
7
The rear brackets can be used with a 19-inch rack.
You may now mount the Switch on a rack. Proceed to the next section.
2.5 Mounting the Switch on a Rack
Use the M6 rack screws (larger than the M4 screws) to mount the Switch with brackets on the rack.
Position a front mounting bracket (that is already attached to the Switch) on one side of the rack,
1
lining up the two screw holes on the bracket with the screw holes at the front of the rack.
Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
2
Repeat steps
3
Position a rear mounting bracket (that is already attached to the Switch) on one side of the rack,
4
lining up the two screw holes on the bracket with the screw holes at the rear of the rack.
Use a screwdriver to install the rack screws through the mounting bracket holes into the rack.
5
Repeat steps
6
Chapter 2 Hardware Installation and Connection
1
and
2
to attach the other front mounting bracket on the other side of the rack.
4
and
5
to attach the other rear mounting bracket on the other side of the rack.
GS3700/XGS3700 Series User's Guide
Front Bracket
28
Rear Bracket
Sliding Rail
Advertisement
Table of Contents
