Configuring Snmp - ZyXEL Communications XGS3700-48 User Manual

Table 235 SNMP Switch Traps
OPTION OBJECT LABEL
stp STPNewRoot
zyMrstpNewRoot
zyMstpNewRoot
STPTopologyChange
zyMrstpTopologyChange
zyMstpTopologyChange
mactable zyMacForwardingTableFull
rmon RmonRisingAlarm
RmonFallingAlarm
cfm dot1agCfmFaultAlarm
classifier zyAclV2ClassifierLogNotifica
tion

48.3.4 Configuring SNMP

From the Access Control screen, display the SNMP screen. You can click Access Control to go
back to the Access Control screen.
Figure 350 Management > Access Control > SNMP
Chapter 48 Access Control
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.15.3.52.3.1
1.3.6.1.4.1.890.1.15.3.53.3.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.15.3.52.3.2
1.3.6.1.4.1.890.1.15.3.53.3.2
1.3.6.1.4.1.890.1.15.3.48.2.1
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.111.2.802.1.1.8.0.1
1.3.6.1.4.1.890.1.15.3.105.4.1
GS3700/XGS3700 Series User's Guide
465
DESCRIPTION
This trap is sent when the STP root switch
changes.
This trap is sent when the MRSTP root
switch changes.
This trap is sent when the MSTP root
switch changes.
This trap is sent when the STP topology
changes.
This trap is sent when the MRSTP topology
changes.
This trap is sent when the MSTP root
switch changes.
This trap is sent when more than 99% of
the MAC table is used.
This trap is sent when a variable goes over
the RMON "rising" threshold.
This trap is sent when the variable falls
below the RMON "falling" threshold.
The trap is sent when the Switch detects a
connectivity fault.
This trap is sent when the Switch detects
classifier log information.