Two Subnets Example - ZyXEL Communications XGS3700-48 User Manual

Chapter 44 VRRP
Figure 325 VRRP Example 1: VRRP Parameter Settings on Switch A
EXAMPLE
Figure 326 VRRP Example 1: VRRP Parameter Settings on Switch B
EXAMPLE
After configuring and saving the VRRP configuration, the VRRP Status screens for both switches
are shown next.
Figure 327 VRRP Example 1: VRRP Status on Switch A
EXAMPLE
Figure 328 VRRP Example 1: VRRP Status on Switch B
EXAMPLE

44.4.2 Two Subnets Example

The following figure depicts an example in which two switches share the network traffic. Hosts in
the two network groups use different default gateways. Each switch is configured to backup a
virtual router using VRRP.
You wish to configure switch A as the master router for virtual router VR1 and as a backup for
virtual router VR2. On the other hand, switch B is the master for VR2 and a backup for VR1.
GS3700/XGS3700 Series User's Guide
436