Ipv6 Source Guard Port Setup - ZyXEL Communications XGS3700-48 User Manual

Table 137 Advanced Application > IP Source Guard > IPv6 Source Guard Policy Setup (Standalone
mode)
LABEL
Validate Prefix
Link Local
Delete
Cancel

25.13 IPv6 Source Guard Port Setup

Use this screen to apply configured IPv6 source guard policies to ports you specify. Use port * to
apply a policy to all ports. To open this screen, click Advanced Application > IP Source Guard >
IPv6 Source Guard Port Setup.
Figure 202 Advanced Application > IP Source Guard > IPv6 Source Guard Port Setup (Standalone
mode)
The following table describes the labels in this screen.
Table 138 Advanced Application > IP Source Guard > IPv6 Source Guard Port Setup (Standalone
mode)
LABEL
Port
Policy Name
Chapter 25 IP Source Guard
DESCRIPTION
This field displays the Validate Prefix status for this IPv6 source guard policy.
This field displays the Link Local traffic status for this IPv6 source guard policy.
Select an entry checkbox and click Delete to remove the specified entry.
Click this to clear the Delete check boxes above.
DESCRIPTION
This field displays the port number. If you configure the * port, the settings are applied to
all of the ports.
Select an IPv6 source guard policy that the Switch will apply to this port.
GS3700/XGS3700 Series User's Guide
291